Stadium Building Guide (3 of 5, Interior of a Rectangular Field Stadium)

So, concluding from my last part, you may want to add designs to the outside of your stadium. But anyways, on to the interior.

So, their is a good and a bad to stadium interiors, the bad is that you have to do a bit of the work without world edit, the good is that with world edit, you only need to build half of the interior because of copy and paste features.

Edit: I added the missing images in a comment below, you can match them with their corresponding image ids in this thread.

So, you're going to want to make the shape rectangular so it flows with the field.
To start you may want to get infinite night vision by going to @Xelasi's night vision map by typing "/search night vision". Next you will want to begin building the colored wall in front the plaza seating. This would look best in your choice of stained clay. It is good to go up 2 blocks from field height.
View attachment 38822
Next, you will want to start on the plaza level seating. In my example, (same size as in the previous parts) I used the seating scale of one decorative block (clay, quartz, lapiz) then any stairs block for seats. Then for the isles, where the decoative block went, add either glowstone or sea lanterns, and where the stairs blocks were, put a different type slab. I suggest building the plaza level seating up ten rows and haveing the isles 10 to 15 blocks apart.
View attachment 38823
In the corners you may want to place wool in a decorative pattern across 4 or 5 of the rows so the seats are on an angle.
View attachment 38824
Now, for the plaza level concourse, you want to make a walkway about 5 blocks of your choice wide and 5 blocks tall, then add multiple concessions stands, make sure to not make them big because you will need room for walk-ways and staircases. Also, you may want to add large rooms along the outside of the stadium.



Onto the club level. You want to only make this area on the broadsided ends enless your satium is really tall (more than 30 blocks). The reason for this is because once we get to the Jumbotrons, you won't want people's view to be blocked. Or the bottom or the club level could be the bottom of the nose-bleed level for the end sides. Anyways, you want to use the same seating scale as the plaza level, but only going up 3 or 4 rows.

Next you want to build the nose-bleed section for the end sides. You want to build with a different scale this time. The seating rows are best to be one block up and one block deep. The isles can be made of stairs between glowstone or sea lanterns. You want to build this up about 10 blocks. You should build two or three cubby holes as enterances/exits for people.

Then for the corners, you want to angle the nose-bleed scale rows and go up about 5 of them, and add a small backdrop.

Next, you want to make a concourse ring similar to the plaza level's. This should connect the end side nose-bleed with the club section. Also build a staircase up and now for the skyboxes.

The skyboxes should be a little long but not wide. Mine are 7 blocks long by 5 blocks wide, I could. Fit 14 across the broadside of the field. You should put a counter and at least 2 rows of seats in them.
View attachment 38826
Now for the broadside's nose-bleed section. This should start one block above the skybox ceiling and go up all the way until you have 3 to 4 blocks clearance. Use the same scale as the other nose-bleed section. You should build two or three cubby holes as enterances/exits for people. Also, on the ends you may want to curve the seating section.
View attachment 38827

View attachment 38828
Now, in the space above one of the corner sections on the club level, you may want to build a control booth.

And unter the corner sections of the plaza level you could make a security center, medical center, floor access room, and a gathering room.
View attachment 38830
Then under the center of the end sides, you can build locker rooms and large garage doors.
View attachment 38831

View attachment 38832
Lastly the main entrances, you can either do an external or internal entry way. For internal, you enter the building then go to the box office, whereas on external the bow office windows are on the outside.

Internal
View attachment 38834
External

I also recommend furnishing the concessions stands.


That should cover just about everything on the inside of a rectangular field stadium.

@MattM1PVP

 

These are the missing images. They are in order from top to bottom. I also added the Ids from the guide.


38822

38823

38824

38826

38827

38828

38830

38831

38832

38834

 

Ok, I added the Ids from the original post. That should help making it easier to read.